D-Link DKVM Hot Key Menu

• Scroll Lock + Scroll Lock + 1 – Switches to PC 1
• Scroll Lock + Scroll Lock + 2 – Switches to PC 2
• Scroll Lock + Scroll Lock + S – Activates Auto Scan Mode. Each computer will be scanned every 10 seconds. Press the space bar to exit auto scan mode.
• Scroll Lock + Scroll Lock + B – Turns beeper ON/OFF
NOTE: The DKVM-2K does not support turning on and off the beeper.
 
• Scroll Lock + Scroll Lock + M – Resets the mouse and keyboard

Note: The right and left key’s can also be used to toggle through each port one-by-one. To activate this feature press Scroll Lock + Scroll Lock and select either the right or left key.

Troubleshooting Tips

Keyboard: If your keyboard is not functional, not detected, or there is a keyboard error, check the following:

• Make sure that the keyboard is properly connected to the computer and to the KVM switch. Check that the keyboard is plugged into the correct USB/PS2 keyboard port and not the USB/PS2 mouse port.
• Verify that the keyboard works when plugged into the computer directly.
• If you have multiple operating systems installed on your computer, please contact your motherboard/computers manufacture for information on enabling USB/PS2 support on your system.

Mouse: If your mouse is not functional, not detected or there is a mouse error, check the following:

• Make sure that the mouse is properly connected to the computer and to the KVM switch. Check that the mouse is plugged into the correct USB/PS2 mouse port and not the USB/PS2 keyboard port.
• Verify that the mouse works when plugged into the computer directly.
• Try using a different mouse.
• If you are having trouble with the mouse movement, try resetting the switch by pressing Scroll Lock + Scroll Lock + M.
• Do not move the mouse or press any mouse buttons when switching from one PC to another.
• Try resetting the mouse by unplugging it from the DKVM for about 3 seconds and reconnection it.

Video: If the image on your monitor is not clear, check the following:

• Verify that the video monitor cables are inserted properly.
• Try lowering the resolution and refresh rate of your monitor.
• Try using a shorter video cable.

loading...